濟南停車棚投放使用率越來越高，那么在使用的時候需要注意幾點要求，這樣才能讓停車棚的使用壽命延長。

The use rate of parking sheds in Jinan is getting higher and higher, so we need to pay attention to several requirements when using them, so as to prolong the service life of parking sheds.

做好表面工作，為了保持停車棚的外觀亮麗，大家就需要定期的做好相關的清理打掃工作，保持它更加干凈整潔

Do a good job of surface work. In order to keep the appearance of the parking shed bright, everyone needs to do a good job of cleaning regularly to keep it clean and tidy

要設計出形態簡潔張力自平衡停車棚，清洗要保證不破壞PVDF和PTFE等涂層膜材表面處理層，因此不可以使用擦洗劑、強溶劑、硬刷等，和家用肥皂或餐具清潔劑相比，一般膜材清洗劑通常是相對，也要避免其皮膚、眼睛和黏膜長期接觸。

A parking shed with simple shape and tension self balancing shall be designed. The surface treatment layer of PVDF, PTFE and other coating film materials shall not be damaged during cleaning. Therefore, detergent, strong solvent, hard brush, etc. shall not be used. Compared with household soap or tableware cleaner, general film cleaner is usually relatively safe, and long-term contact with skin, eyes and mucous membrane shall be avoided.

濟南停車棚如果產生積水或積雪，就要立即積水和積雪，如果雨雪天氣持續不斷，積水會讓膜材破壞，要對公眾關閉膜面覆蓋的空間，并立即采取措施避免新積水。

If there is water or snow in Jinan parking shed, it is necessary to immediately remove the water and snow. If the rain and snow weather continue, the water will damage the membrane materials. The space covered by the membrane should be closed to the public, and immediate measures should be taken to avoid new water.

為了減少生銹對膜表面的影響，分別選擇有銹跡的膜表面，并在生銹的延伸處設置停車棚的固定。在膜的邊緣處，考慮到拉力的受力點，并且需要適當?shù)丶訌?qiáng)張力膜的邊緣。

In order to reduce the impact of rust on the film surface, select the film surface with rust, and set the parking shed at the extension of rust. At the edge of the membrane, the stress point of the tension shall be considered, and the edge of the tension membrane shall be properly strengthened.

此外對金屬連接件應采用可靠的防腐蝕措施，要考慮節點構造偏心對拉索、膜材產生的影響，施加預張力的方式、結構安裝允許偏差，以及進行二次張拉的可能性。

In addition, reliable anti-corrosion measures shall be taken for metal connectors. The influence of node structure eccentricity on cables and membrane materials, the method of applying pretension, allowable deviation of structure installation, and the possibility of secondary tensioning shall be considered.

停車棚在制造的時候，每個步驟以及操作方法都是會引起設備出現故障的因素，對于后期的質量以及使用壽命起到了重要的作用，因此，千萬不能盲目操作才可以。更多相關事項就來我們網站http://m.ajuxfs.cn咨詢吧！

During the manufacturing of the parking shed, each step and operation method are factors that will cause equipment failures, which play an important role in the later quality and service life. Therefore, blind operation is not allowed. Come to our website for more information http://m.ajuxfs.cn Consult!